Fingerprint Heart Slider Stainless Steel Memorial Cremation Pendant Necklace

Specifications

Important Notes & Information

Production Process and Turnaround Time - 1-3 business days from the date we approve your print file

Step 1. We digitally 'touch-up' prints

We need 2-3 business days to clean, edit and color-balance your prints to bring out as much ridge detail and contrast as possible. Depending on what we receive from you, we may request new prints or better scans. A detailed email will be sent if we need better prints.

Step 2. Prints sent to vendor

We'll send the touched-up prints to our vendor for processing and creation of the piece(s). of the order. The vendor also needs about 2-3 business days to assess print quality before going into production. At this point the vendor may still reject and request new prints or better scans. A detailed email will be sent if the vendor need better prints.

Step 3. Production of print piece

Production of the print pieces can take 1-3 business days after step 1 and 2 above.

How do I make fingerprints or other prints?

For a more detailed instructions, click here.

1. Use an ink pad with black ink and a sheet of blank white paper (or use the optional Inkless Print Kit found under "Print Sending Option").
2. Select the area of the print that is the most interesting
   (for instance, where there may be a swirling in the center).
3. Gently touch the ink pad a couple of times and then tap on the white paper (rolling is not advised). Practice until you have a high-quality ink print
   (the better the quality of the original, the better the final product will be).
4. Scan the print at 600 ppi and save in .jpg or .bmp file format.
5. Email the jpg along with your order number to service@mainelyurns.com. Or, mail a hardcopy (please do not send originals documents such as birth certificates, etc.) to Mainely Urns, Inc., 19-B Portland Road, Gray, ME 04039.

   If you have any questions, please call 866.516.1296.

Questions & Answers

Reviews